Release Category: Minor
New Features
- History graphing page
- All circuit history is now fully available to display, with ability to set custom date range.
- Ability to select multiple circuits to display on the same graph.
- Support for multiple trendlines with legend to identify the data.
- Support to display individual RTD temperatures on the temperature plot for controllers
supporting multiple RTDs.
- Alarms Dashboard
- Ability to re-order alarm columns in the column configuration widget.
- Display of the “Recent Note” column as default setting.
- Display of the near real-time current and temperature readings for each circuit.
- Default setting for number of circuits to be displayed set to 100
- Feature added to make the table header always visible on the page.
- Feature added to make the alarm type a searchable filter field.
- Added the Live Reading column back into the column display options.
- Circuit Management
- Ability to change a circuit’s line-sense vs ambient-sense setting where supported by the
controller type.
- Display of near real-time control temperature in the circuit list pane.
- Setpoint resolution changed to single decimal.
- Ability to acknowledge all circuit alarms at once in addition to acknowledgement by alarm
type.
- Ability to sort circuits by the circuit number, irrespective of their alarm status.
- Network Management
- Ability to reset Genesis Bridges and the Genesis Gateway via button.
- Ability to restart the Virtual Controller and Rabbit MQ services.
- Improved database write performance.
Resolved Issues
- UI
- Resolved the issue of temperature units not being displayed correctly when the unit settings
had been changed directly on the controller
- Health Monitor
- Fixed the circuit setpoint graphing to accurately reflect historical setpoint changes.
- Fixed issue with log files not containing any text upon download if the most recent date was
selected.
- Resolved the issue of the false low disk space alert due to erroneous disk space data
reported by MS SQL.
- Circuit Details
- Resolved issue of alarm acknowledgement and inability to change setpoints under certain
conditions
- Resolved issue of alarm states resetting to normal upon using refresh button.
- Resolved issue of circuit setpoint changes periodically timing out.
- Resolved issue of the left-hand panel pane not displaying circuits properly for TC101/TC202
controllers.
- Resolved issue in the panel detail pane where some temperature values were displaying
unconverted values.
Alarms Dashboard
- Removed the Alarm Type filter from the LOTO and Forced On tabs.
- Resolved issue of the units not being displayed properly in the setpoint columns
- Resolved issue of the alarm counts for a panel mismatching those displayed on the Circuit
Management page.
- Resolved issue of the last modified date not getting updated properly in certain conditions.
- Resolved issue of the list of circuits automatically getting re-arranged with new data
changes.
- Resolved issue of all currently LOTO’d circuits not being displayed.
- Resolved issue of values in the Forced-On tab not being current.
- Network Management
- Resolved issue of device firmware versions not being displayed correctly
- Genesis Bridge
- Resolved issue where a Bridge could enter an indeterminate state if a USB stick is inserted
without a config file.
- Genesis Gateway
- Resolved issue with clock synchronization
- TCM18 support
- Resolved issue with some settings not being displayed in the circuit details view after a
TC1818 controller swap.
- Resolved issue with timeouts after changing the RTD configuration.
- Genesis Duo support
- Resolved issue yielding erroneous communication errors.
- Genesis RS 485 support
- Resolved issue where after making a setpoint change, the update was not being confirmed
to the Genesis Server.
- Steam Trace panels
- Resolved a timeout issue while changing high and low temperature alarm setpoints.
- Resolved issue with erroneous low-temperature alarms.
- T2000 support
- Resolved issue with the power state not being displayed properly.
- RTD Pods
- Resolved issue with multiple DTMs not being allowed to be added to the same RTD pod.
- Third Party Controller support
- Resolved issue with the power state setting not being displayed properly.
- Resolved issue of inability to add multiple panels with the same Modbus address to the
same bridge
- Resolved issue of configuring a new third-party panel on the Network Management page.
- Resolved issue of inability to change the circuit control mode
- Resolved issue related to the self-test interval setting
In case of any issues, please report them using the following link. Customer Issue Reporting Controls and Monitoring
Please visit the Thermon Software Download Portal
Rohit Jain
Senior Product Manager – Controls & Monitoring
