Working on a project? Make your own customized Heat Trace Bill of Materials.

Step 1: Choose your application

Step 2: Provide specifications

Step 2: Provide specifications

  • A diagram showing the spacing pitch of RGS Cable secured along a metal roof.
  • A diagram showing the spacing pitch of RGS Cable in a zig-zag pattern along a shingled roof.

Step 2: Provide specifications

Working on a project? Make your own customized Heat Trace Bill of Materials.

Your custom Thermon Heat Trace Bill of Materials

Export to Excel
Line Part number Description Quantity Unit

1

RGS-x-x-OJ

x

x

feet

2

PCA-COM

Power connection kit

x

kit(s)

3

ET-6C

End termination kit

x

kit(s)

4

FT-1L

Thermon Fixing Tape (1/2 inch x 108 ft)

xxx

roll(s)

5

AL-20L

Thermon Aluminum Tape (2 inch x 150 ft)

x

roll(s)

6

CL

Caution labels (25/pack)

x

pack(s)

7

N4X-40

Heat Trace Thermostat

each
Notes

Important Disclaimer: The units of measurement reflect Metric and Imperial where possible in the user interface. The calculations are based on North America and the Bill of Materials (BoM) will reference the unit of measurement that is Imperial (feet) or kits (inches and feet). Note the descriptions show unit of measurements and some products are noted as currently only certified and available in Canada and/or US. Please work with your regional Thermon Sales team on finalizing a BoM and estimate.

  1. The customer-supplied Circuit breaker must be equipped with a 30 mA ground-fault protection.
  2. Power wiring, conduit, junction boxes and contactors (if required) by others.
  3. Note, quantities are as required for the job/project indicated.
  4. This Bill of Materials is based on the design parameters given above. Should the actual and verified conditions vary, Thermon's material list and circuiting information may change. Please contact Thermon for details.
  5. Based on non-hazardous area classification.
  6. CL Caution Labels are adhesive labels to be installed on insulation vapor barrier at 10' intervals or as required by code or specification.
  7. Note: Heat loss calculations are based on IEEE Std 515-1997, Equation A.1, with the following provisions:
    • Piping insulated with glass fiber in accordance with ASTM Std C547.
    • Pipes located outdoors in the noted ambient with a 25 mph wind.
    • A 10% safety factor has been included.
  8. Maximum individual circuit length: ' (based on voltage and breaker size)
  9. Extra cable included: '
  10. Additional cable will also be needed to provide extra heat at valves, pumps, miscellaneous equipment and pipe supports. Contact Thermon for further information.
  11. Larger pipes may require multiple passes of heating cable. This design requires pass(es).

All statements, technical information and recommendations contained herein are based on data we believe to be reliable but the accuracy or completeness thereof is not guaranteed. Please refer to specific product packaging, user instructions and related documents for complete details.


Product Use: Many factors outside of Thermon's control and uniquely within user's knowledge and control can affect the use and performance of the product in a particular application. Given the variety of factors that can affect the use and performance of the product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user's method of application. Thermon shall not be liable for any loss or damage, whether direct, indirect, incidental, special or consequential arising out of the sale, use or misuse of the products or the user's inability to use such product.

Export to Excel Modify  

Have additional questions or concerns?

Contact a representative

Working on a project? Make your own customized Heat Trace Bill of Materials.

Your custom Thermon Heat Trace Bill of Materials

Export to Excel
Line Part number Description Quantity Unit

1

KSR-2

Snow Melt Self-Regulating heating cable, 208-240V

x

feet

2

KSR-CFK

Power Connection and end termination kit (w/o junction box)

x

kit(s)

3

CL

Caution labels(25/pack)

x

pack(s)

4

NT-7

Nylon Tie Wraps (250/pack)

x

pack(s)

5

STC-DS2C

Automatic rain/snow controller

x

each

6

KSR-EJK

Expansion Joint kit

as needed

kit

7

KSR-SR-DB

Cable Inline Splice kit

as needed

kit
Notes

Important Disclaimer: The units of measurement reflect Metric and Imperial where possible in the user interface. The calculations are based on North America and the Bill of Materials (BoM) will reference the unit of measurement that is Imperial (feet) or kits (inches and feet). Note the descriptions show unit of measurements and some products are noted as currently only certified and available in Canada and/or US. Please work with your regional Thermon Sales team on finalizing a BoM and estimate.

  1. The customer-supplied Circuit breaker must be equipped with a 30 mA ground-fault protection.
  2. Power wiring, conduit, junction boxes and contactors (if required) by others.
  3. Note, quantities are as required for the job/project indicated.
  4. This Bill of Materials is based on the design parameters given above. Should the actual and verified conditions vary, Thermon's material list and circuiting information may change. Please contact Thermon for details.
  5. Non-hazardous area classification assumed.
  6. Cable spacing: " (based on snowfall conditions and critical area) (based on voltage and breaker size)
  7. Maximum individual circuit length: ' (based on voltage and breaker size)
  8. Extra cable included: ' (includes 4' for each KSR-CFK kit)
  9. Approximate total load: kW

All statements, technical information and recommendations contained herein are based on data we believe to be reliable but the accuracy or completeness thereof is not guaranteed. Please refer to specific product packaging, user instructions and related documents for complete details.


Product Use: Many factors outside of Thermon's control and uniquely within user's knowledge and control can affect the use and performance of the product in a particular application. Given the variety of factors that can affect the use and performance of the product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user's method of application. Thermon shall not be liable for any loss or damage, whether direct, indirect, incidental, special or consequential arising out of the sale, use or misuse of the products or the user's inability to use such product.

Export to Excel Modify  

Have additional questions or concerns?

Contact a representative

Working on a project? Make your own customized Heat Trace Bill of Materials.

Your custom Thermon Heat Trace Bill of Materials

Export to Excel
Line Part number Description Quantity Unit

1

RGS-x

x

feet

2

18-SXG-KIT

Power connection kit without junction box (Canada Only)

x

kit(s)

3

ET-4S

Heat Shrink End termination kit (Canada Only)

x

kit(s)

OR

3

RGS-CFK

Circuit Fabrication Kit (Power/End) (US Only)

x

kit(s)

4

JB-K-L

Non-metallic Junction Box

x

each

5

AL-20L

Thermon Aluminum Tape (2 inch x 150 ft)

x

roll(s)

6

CL

Caution labels (25/pack)

x

pack(s)

7

RG-DCH

Downspout cable hanger (sold individually)

x

each

8

STC-DS8

Automatic rain/snow sensor controller with 10' remote sensor

x

each

9

RG-CMC

Cable mounting clip (P-clip, 100/bag)

as needed

bag(s)

10

RG-CRF

Cable roof fastener (flat, 25/bag)

as needed

bag(s)

OR

10

RG-ACF

Cable roof fastener (10/bag) (Canada Only)

as needed

bag(s)
Notes

Important Disclaimer: The units of measurement reflect Metric and Imperial where possible in the user interface. The calculations are based on North America and the Bill of Materials (BoM) will reference the unit of measurement that is Imperial (feet) or kits (inches and feet). Note the descriptions show unit of measurements and some products are noted as currently only certified and available in Canada and/or US. Please work with your regional Thermon Sales team on finalizing a BoM and estimate.

  1. The customer-supplied Circuit breaker must be equipped with a 30 mA ground-fault protection.
  2. Power wiring, conduit, junction boxes and contactors (if required) by others.
  3. Note, quantities are as required for the job/project indicated.
  4. This Bill of Materials is based on the design parameters given above. Should the actual and verified conditions vary, Thermon's material list and circuiting information may change. Please contact Thermon for details.
  5. Based on Non-hazardous area classification.
  6. Maximum individual circuit length: ' (based on voltage and breaker size)
  7. Extra cable included: '

All statements, technical information and recommendations contained herein are based on data we believe to be reliable but the accuracy or completeness thereof is not guaranteed. Please refer to specific product packaging, user instructions and related documents for complete details.


Product Use: Many factors outside of Thermon's control and uniquely within user's knowledge and control can affect the use and performance of the product in a particular application. Given the variety of factors that can affect the use and performance of the product, user is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user's method of application. Thermon shall not be liable for any loss or damage, whether direct, indirect, incidental, special or consequential arising out of the sale, use or misuse of the products or the user's inability to use such product.

Export to Excel Modify  

Have additional questions or concerns?

Contact a representative

Thank you for your inquiry. One of our heat tracing experts will follow up with you within the next three business days.